Video report and description of bleaching process using two-component agent Snegurochka-2
(The text is an interpretation of video material)
We represent you a product developed by Mendeleev Ltd. from Saint Petersburg. It is a two-component wood bleaching agent – Snegurochka-2.
Let’s take a pallet for our experiment. Remove the upper contaminated layer using a jack plane. Now we see the limits of upper and lower zones. The lower part will be bleached using a chemical method.
Let’s proceed with antiseptic treatment and take the first component – Snegurochka-2.
Snegurochka-2 is a clear liquid without any odor. It is a highly-efficient agent designed to catalyze, bleach and preserve wood.
Let’s apply at least 100 ml of Snegurochka-2 per square meter with a flywheel brush and wait for 20-30 minutes.
Snegurochka-2 destroys fungi, weeds, moss and bacteria and makes their waste products colorless. This solution is recommended both for interior and exterior operations. It is free of chlorine and not flammable!
The second component is hydric dioxide with minimum concentration of 30%. Please note that mixing Snegurochka-2 and hydric dioxide with each other or any other solutions is not allowed. Let’s apply at least 100 ml of hydric dioxide per square meter and wait until foaming stops. As a rule, it takes about 30-60 min. Wear overalls, rubber gloves and safety goggles when working with solutions. In the event of contact with skin or mucus membranes, rinse immediately with plenty of running water and consult a doctor if necessary.
Store solutions in tightly closed containers at +5°С to +35°С. Shelf life is 24 months! Keep out of reach of children!
Then thoroughly flush the treated surface with water. It is also possible to rinse with a radial water jet using a Kärcher high-pressure cleaner. We recommend treating the most damaged areas again to enhance a bleaching effect.
Snegurochka-2 will restore your most valuable woodwork!
Snegurochka-2 — System-Based Two-Component Bleaching and Preliminary Wood Preservation Agent. Dimet® (Professional)
Highly-efficient agent for wood bleaching. Prevents possible biodeterioration and destroys fungi, weeds, moss and bacteria.
Remove mud, resin and old paint with a brush, a solvent or the Old Paint Remover of Mendeleev Ltd. Apply 100-300 g of Snegurochka per square meter with a brush, a roller or a wad and let it dry. Apply 100-300 g of hydric dioxide per square meter and wait until foaming stops (usually it takes about 30-60 minutes). Flush the surface thoroughly with water, let it dry and repeat the procedure if necessary.
Surface humidity shall not exceed 80 % before application. Temperature shall be above +5°С. Remove rags saturated with hydric dioxide from the room to avoid overheating. Wash tools with water. Apply Dimet ® Base and Ultra-Antiseptic Impregnation Compound manufactured by Mendeleev Ltd. for long-term protection of wood surfaces.
Composition: Water, alkaline agents, antiseptics, nonion surfactants, organic solvents.
Wear overalls, rubber gloves and safety goggles when using the product. In the event of contact with skin or mucus membranes, rinse immediately with plenty of running water, consult a doctor if necessary and show this label. Store in tightly closed containers at +5°С to +35°С. Shelf life is 24 months! Keep out of reach of children! Solution is not flammable! Free of chlorine! Do not mix with hydric dioxide and/or other acids in one container.
|Solids content, %, minimum||30|
|solution рН, minimum||10|
|Consumption per layer, ml||100-300 (depending on the wood destruction degree)|
|Minimal treatment temperature, °С, minimum||5|
|Storage conditions, °С, minimum||5|
|Warranty shelf life, months||12|
|1 – before treatment with Snegurochka|
|2 – after treatment with Snegurochka|
|3 – after treatment with Snegurochka and varnishing|